Page tree
Skip to end of metadata
Go to start of metadata

Extruder for experiments with 2.85mm MIM filament, to be mounted on a Lulzbot TAZ6



Electrical connection:

  (extruder side)


  • E3D heatsink fan is 24V, to make it work it is connected to pin 7 (24V+) and pin 10 (GND unswitched)
  • There is no end stop switch, pins 11 and 12 need to be shorted

Configuration

  • Bondtech QR extruder has an E-Step value of 492.45


  • No labels