See https://github.com/Laser4DIY/XY-Table
The Laser4DIY XY Table is licensed under the CERN-OHL-P v2.
Qty | Part Name | Process | Material | File | |
---|---|---|---|---|---|
2 | StandardEndPlate_BeamBracket | Laser cutting | Aluminium (AlMg3), 2mm | 2mm_ALL_with_tabs.dxf | |
2 | StandardEndPlate_InnerPart | Laser cutting | Aluminium (AlMg3), 2mm | - " - | |
2 | StandardEndPlate_OuterPart | Laser cutting | Aluminium (AlMg3), 2mm | - " - | |
1 | EndPlateLower_BeamBracket | Laser cutting | Aluminium (AlMg3), 2mm | - " - | |
1 | EndPlateLower_InnerPart | Laser cutting | Aluminium (AlMg3), 2mm | - " - | |
1 | EndPlateLower_OuterPart | Laser cutting | Aluminium (AlMg3), 2mm | - " - | |
1 | EndPlateUpper_BeamBracket | Laser cutting | Aluminium (AlMg3), 2mm | - " - | |
1 | EndPlateUpper_InnerPart | Laser cutting | Aluminium (AlMg3), 2mm | - " - | |
1 | EndPlateUpper_OuterPart | Laser cutting | Aluminium (AlMg3), 2mm | - " - | |
1 | BedRuler | Laser cutting | Aluminium (AlMg3), 2mm | - " - | |
2 | SledPlate | Laser cutting | Aluminium (AlMg3), 3mm | 3mm_ALL_with_tabs.dxf | |
1 | BedPlate | Laser cutting | Aluminium (AlMg3), 3mm | - " - | |
2 | SledSpacer | Laser cutting | MDF, 5mm | 5mm_sledspacer.dxf | Could also be aluminium |
1 | Microswitch Bracket | 3d printing | any plastic e.g. PLA | MicroswitchBracket.stl | |
1 | Microswitch Bracket 2 | 3d printing | any plastic e.g. PLA | MicroswitchBracket.2stl |
The "end plates" are made of 3 layers of lasercut aluminium, which are aligned and held together by M3 screws. It is also possible to have them CNC milled as one piece, but we chose laser cutting as it is much cheaper to get them produced this way.
Copyright FabLab München e.V. 2021
This source describes Open Hardware and is licensed under the CERN-OHL-P v2
You may redistribute and modify this documentation and make products using it under the terms of the CERN-OHL-P v2 (https:/cern.ch/cern-ohl).
This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE.
Please see the CERN-OHL-P v2 for applicable conditions