Von Mac via VisiCut auf Zing 3060

Diese Dokumentation ist seit dem Erscheinen von VisiCut 1.4 veraltet.
Hier geht es zur Dokumentation für VisiCut 1.4.

Diese Dokumentation basiert auf:

  • Mac OS X 10.7.2 (Lion)
  • VisiCut 1.3.2

Wir sind noch im "Jugend forscht"-Modus. Die Dokumentation illustriert unser derzeitiges Wissen.

Installation

Konfiguration (Einrichten des Zing 3060)

  • Autsch. Das Feld Materials Dir ist ein Pflichtfeld! VisiCut hat uns das nicht gesagt.

Wir müssen noch einen Weg finden, wir wir ein Materials XML für das gesamte FabLab haben können.

  • TODO: Prüfen, was wir hier eingeben können.
  • Einen lokalen Pfad zu benutzen (z.B. /Users/mgeck/Dropbox/FabLab/VisiCut_Material) führt zur Meldung "Material not supported" im LaserCutter Drop-Down dialog. Vermutlich muss man erst ein Materials XML durch Edit > Advanced > Manage Materials... anlegen.
    Wäre schön, wenn gleich ein Template angelegt worden wäre.

Lasern

Achtung: Man muß am Anfang den Focus auf die Höhe des Gitters einstellen - dann wird vom Programm der Abstand automatisch auf die gewählte Materialhöhe korrigiert. Das erspart das Kalibrieren / Fokusieren (Set Focus), vorausgesetzt man nutzt kein CorelDraw mehr, denn Anwender, die CorelDraw benutzen, würden die Fokuseben wieder verstellen.

Fazit

User Stories

Folgende Rollen gibt es bei uns:

Die Umsetzung folgender Epics & User Stories wünschen wir uns (priorisiert):

Theme: Central Configuration for all FabLab users.

Epic: As a FabLab admin I want to provide a central library of materials to FabLab user so that FabLab users do not have to configure their own material libraries, but could benefit from the shared knowledge on materials.

  • As a FabLab admin I want to understand how I can reuse the library I created in the Epilog driver so that I can save time and effort on getting all the materials data into VisiCut.
  • As a FabLab admin I want to understand what the best-practice is for storing the material library on a central storage location so that I can set it up.
    • Given that FabLab users are using Linux, Mac and Windows laptops.
    • Given that FabLab users do not know how to mount a network drive - If you know how to do that consider yourself a FabLab admin.
    • Given that FabLab users do not remember their passwords for shares.

Epic: As a FabLab admin I want to have an easy way to deploy the configuration to all FabLab users so that FabLab users woud not have to set up the VisiCut configuration manually.

  • Ideally:
    • As a FabLab admin I want to be able to provide an installer / application that includes all configuration data so that FabLab users would not have to worry about setting up the system (Best practice: Cisco AnyConnect VPN Client. Users do not have to care about any configuration but just load and start the application)
  • Good enough:
    • As a FabLab admin I want to have a VisiCut configuration file that users can load so that I can point them to the configuration file.

Theme: Positioning my work.

  • As a FabLab user I want to be able to rotate my SVG so that I don't have to go back to my drawing application, rotate, save, open again.

Theme: Localization.

  • As a FabLab user speaking German - but little English - I want to have a localized version of VisiCut so that I don't feel stupid when using the application.
  • As a FabLab admin I want to know how I can contribute to the localization effort so that I can help localizing VisiCut.