- Table Size: 165mm x 165mm
- Overall Size: 368mm x 333mm x 56mm (with pancake motor)
- Based on 2 OpenBuilds NEMA17 V-Slot Actuators with Lead Screw
Files
See https://github.com/Laser4DIY/XY-Table
License
The Laser4DIY XY Table is licensed under the CERN-OHL-P v2.
Parts List
Off-the-shelf parts
Qty | Part Name | Part Link | Comments |
---|---|---|---|
2 | 8mm Metric Acme Lead Screw 290mm | openbuildspartstore.com makersupplies.dk ratrig.com | |
2 | Anti-Backlash Nut Block for 8mm Metric Acme Lead Screw | openbuildspartstore.com makersupplies.dk ratrig.com | SKU 1055; set includes M5 lock nuts |
4 | V-Slot 20x20mm 250mm | makersupplies.dk ratrig.com | |
8 | Xtreme Solid V Wheel Kit | openbuildspartstore.com makersupplies.dk ratrig.com | SKU 465 |
4 | Aluminum Spacers - 6mm | openbuildspartstore.com ratrig.com | SKU 90 |
4 | Eccentric Spacer - 6mm | openbuildspartstore.com ratrig.com | SKU 226 |
4 | Ball Bearing 688Z 8x16x5 | openbuildspartstore.com ratrig.com | SKU 780 |
4 | 8mm Shim (12x8x1mm) | openbuildspartstore.com ratrig.com | SKU 835 |
4 | Lock Collar - 8mm | openbuildspartstore.com ratrig.com | SKU 840 |
5 | V-Slot T-Nut M5 | openbuildspartstore.com ratrig.com | |
4 | M5 x 20mm Low Profile Screw | openbuildspartstore.com ratrig.com ratrig.com(25pack) | SKU 750-pack |
8 | M5 x 22mm Low Profile Screw | for mounting wheels | |
8 | M5 Nut Low Profile | openbuildspartstore.com ratrig.com | SKU 181; for mounting wheels |
11 | M3 x 8mm Button Head Screw | ||
4 | M3 x 5mm Button Head Screw | For screwing SledPlate to BedPlate | |
10 | M3 Nut | ||
6 | M2 x 6mm Screw | ||
4 | M2 x 10mm Screw | ||
10 | M2 Nut | ||
2 | M2 Washer | ||
8 | Self Tapping Screw #10 | openbuildspartstore.com ratrig.com | SKU 720 |
3 | Hex Standoff M3 (female/male) 30mm | For mounting one of the stepper motors | |
2 | NEMA 17 Stepper Motor | openbuildspartstore.com ratrig.com | Use pancake motor to save space |
2 | GT2 pulley 20 5mm bore | makersupplies.dk ratrig.com | |
2 | GT2 pulley 20 8mm bore | makersupplies.dk | |
1 | GT2 timing belt 6 mm closed loop 128 mm | https://gtech-shop.de/GT2-Zahnriemen-6-mm-128-mm-64-Zaehne | |
1 | GT2 timing belt 6 mm closed loop 250 mm | https://gtech-shop.de/GT2-Zahnriemen-6-mm-250-mm-125-Zaehne | |
2 | Micro Switch | Panasonic AV32143AT or similar |
Custom parts
Qty | Part Name | Process | Material | File | |
---|---|---|---|---|---|
2 | StandardEndPlate_BeamBracket | Laser cutting | Aluminium (AlMg3), 2mm | 2mm_ALL_with_tabs.dxf | |
2 | StandardEndPlate_InnerPart | Laser cutting | Aluminium (AlMg3), 2mm | - " - | |
2 | StandardEndPlate_OuterPart | Laser cutting | Aluminium (AlMg3), 2mm | - " - | |
1 | EndPlateLower_BeamBracket | Laser cutting | Aluminium (AlMg3), 2mm | - " - | |
1 | EndPlateLower_InnerPart | Laser cutting | Aluminium (AlMg3), 2mm | - " - | |
1 | EndPlateLower_OuterPart | Laser cutting | Aluminium (AlMg3), 2mm | - " - | |
1 | EndPlateUpper_BeamBracket | Laser cutting | Aluminium (AlMg3), 2mm | - " - | |
1 | EndPlateUpper_InnerPart | Laser cutting | Aluminium (AlMg3), 2mm | - " - | |
1 | EndPlateUpper_OuterPart | Laser cutting | Aluminium (AlMg3), 2mm | - " - | |
1 | BedRuler | Laser cutting | Aluminium (AlMg3), 2mm | - " - | |
2 | SledPlate | Laser cutting | Aluminium (AlMg3), 3mm | 3mm_ALL_with_tabs.dxf | |
1 | BedPlate | Laser cutting | Aluminium (AlMg3), 3mm | - " - | |
2 | SledSpacer | Laser cutting | MDF, 5mm | 5mm_sledspacer.dxf | Could also be aluminium |
1 | Microswitch Bracket | 3d printing | any plastic e.g. PLA | MicroswitchBracket.stl | |
1 | Microswitch Bracket 2 | 3d printing | any plastic e.g. PLA | MicroswitchBracket.2stl |
The "end plates" are made of 3 layers of lasercut aluminium, which are aligned and held together by M3 screws. It is also possible to have them CNC milled as one piece, but we chose laser cutting as it is much cheaper to get them produced this way.
Overall Size
The overall size of the table is larger than its components, as the table moves beyond their extents. The following drawing shows how much space is needed. The aluminum extrusions of the lower rail (vertical in the drawing) are the ones that should be fixed e.g. to a mounting plate using brackets or V-slot T-nuts.
Assembly
- Please see included STEP file where the individual parts go.
- The wheels are attached with 6mm spacers, with standard spacers on one side and eccentric spacers on the other side of the sled. The eccentric spacers can be used to increase the force the wheels press onto the beams.
- The lasercut holes in the aluminium plates are often too small. Drill them out to have the right sizes so that the screws go through. The only exception are 4 holes in the bed plate:
These holes need an M3 thread to be cut into. Use M3x5 screws to bolt the upper sled plate to the bed plate using these threaded holes. - The 8mm shims (12x8x1mm) are not shown in the STEP file. The shims go onto the lead screws between the lock collars and the ball bearings.
Copyright FabLab München e.V. 2021
This source describes Open Hardware and is licensed under the CERN-OHL-P v2
You may redistribute and modify this documentation and make products using it under the terms of the CERN-OHL-P v2 (https:/cern.ch/cern-ohl).
This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE.
Please see the CERN-OHL-P v2 for applicable conditions